PTFE Unlaminated Membrane Filters. Our unsupported, hydrophobic, PTFE membrane filters are ideal for sterilization and venting applications involving air, gasses, and solvents/acids incompatible with most other filters. These PTFE filters are chemically and biologically inert, stable up to 260°C, and will withstand the majority of concentrated
Overview Fluoropore™ Membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support. (Catalogue numbers containing ""FHUP"" have no backing.) Fluoropore™ Membranes provide broad chemical compatibility, high flow rates and consistency.
0.2 µm Filter Diameter ⌀ 47 mm $493.00 Hydrophobic PTFE Membrane Filters / Type 11806 25 Item no. 11806-100------G Pore Size 0.45 µm Filter Diameter ⌀ 100 mm $493.00 Hydrophobic PTFE Membrane Filters / Type 11803 100 Item no. 11803--13------N Pore Size 1.2 µm Filter Diameter ⌀ 13 mm $329.00 Hydrophobic PTFE Membrane Filters / Type 11806 100
These PTFE Membranes are the perfect advanatage to your laboratory. These Filters are extremely hydrophobic and exhibit superior chemical compatability with agressive solutions. These PTFE Unlaminated Membrane Filters are used for your compatiable non-aqueous fluids.
Find 0.2 ptfe filter and related products for scientific research at MilliporeSigma. 0.2 um pore size, Hydrophilic PTFE membrane, 142 mm diameter: Expand. Hide.
Our Omnipore membrane is a hydrophilic PTFE membrane that is compatible with virually all solvents, acids, and alkaline solutions. Features & Benefits: - Biologically and chemically inert. - High porosity yields high flow rates. - Hydrophobic and hydrophilic PTFE varieties available for filtration of aqueous and organic-based samples.
A pore size of 0.2 µm is small enough to remove microbes from solutions; a 0.45 µm ore size can remove larger particulates. Color and Grids White membrane filters may be plain or marked with square grids (outlined in black) that can help with enumerating particles.
VWR 0.2 um ptfe syringe filter for hospitals-Voa Vial . PTFE Membrane | 229757 • CELLTREAT Scientific PTFE Syringe Filter, 0.22μm, 30mm, Sterile • 229757 • Filters are molded in the polypropylene housings, providing a reliable seal without the use of adhesives Female luer-lock inlet and male luer slip outlet Color coded by membrane type
Pall Acrodisc ptfe membrane filter 0.22 um online-PTFE Pall 4652 Acrodisc Syringe Filters with Super Membrane. This item: Pall 4652 Acrodisc Syringe Filters with Super Membrane, Sterile, 0.2 µm, 32mm, Pack of 50 $190.91 ($3.82 / 1 Each Set) In stock.
0.2 um pore size, Hydrophilic PTFE membrane, 47 mm diameter Omnipore Membrane Filter MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. Technical Information Data Sheet JGWP04700 100 pack, 0.2 µm, 47 mm, white, plain Price could not be retrieved Recommended Products Overview
Hydrophobic PTFE membrane bonded to a high density polyethylene support - Find MSDS or SDS, a COA, data sheets and more information.
1. Airflow values calculated assuming linear relationship between volumetric airflow and differential pressure. 2. Water flows measured after prewetting with alcohol and calculated assuming linear relationship between flow and differential pressure. 3. Bubble points for 0.2µm, 0.45µm, and 3.0µm pore sizes measured using IPA; all others
These hydrophobic PTFE membrane filters are laminated onto polypropylene netting for improved strength and handling. Due to broad chemical compatibility and excellent water repellency, they are ideal for solvent filtration, phase separations, venting, and air sampling.
Ptfe Membrane 0.2 at Thomas Scientific. Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications.