0.2 µm µm nominal Diameter (Metric) 13 mm Effective Filtration Area (Metric) 1 cm² Filter Media Hydrophobic PTFE membrane on a polypropylene support Hold-Up Volume <30 µL Housing Material polypropylene Maximum Operating Pressure (bar) 6.9 bar Maximum Operating Temperature (Metric) 100 °C Typical Flow Rate 245 mL/min at 1.0 bar (100 kPa, 15 psi)
Specifically designed for your oil and gas application, our water separation media: Reduce material usage – Porex bonded fiber material products can replace the need for multiple medi layers commonly found in oil/water separation filters. Self support – Filters can be self-supporting and customized into various shapes and sizes. REQUEST SAMPLE.
Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high Related Products: Hydrophobic Filter Compare this item
Through a collaborative engineering partnership, Porex develops high-value solutions to their product design challenges in absorption, application, diffusion, filtration, venting, and wicking. By applying our extensive porous polymer material science, product design, and custom plastic manufacturing expertise to developing porous solutions, we
Filter Tips . POREX Filter Tips are used with low quantities of particulates and flow at the filter bottom. Material: Porous PE. Available Sizes: 2, 5, 10, 20 & 45um sizes. POREX Filter Tips are available in and can be used on sample cannulas with 1/6” diameter. APPLICATIONS: AVAILABLE CONFIGURATIONS: Related Resources:
Nov 19, 2021 · Nov 16, 2021 · Nov 09, 2021 · Oct 29, 2021 · Oct 21, 2021 · luer lock ptfe 0.2 micron filter for venting-PTFE Membrane Filter 0.22 Micron Syringe Filters Filter Products Close Filter Products Currently Shopping by Pore Size: Remove This Item 0.22um Category PTFE Syringe Filters, 0.22 um, 25mm, Double Luer Lock, PP Housing
With numerous medical and industrial approvals and certifications, Porex Virtek PTFE membrane is up to the most demanding challenges. To meet these challenges, PTFE membranes are extremely durable with superior chemical resistance to many aggressive media and corrosive solvents.
Oct 11, 2021 · Porex 0.22 um ptfe syringe filter for sterilization-Voa Whatman Puradisc 25 mm PTFE Syringe Filters, 0.2 µm, 1000. PTFE Syringe Filters, 0.22 um, 25mm, Luer-Lok/Luer Slip, Nonsterile, 100 per pack, SF14468 Regular Price: $128.55 Price $93.59 As low as: $84.23 Description Whatman 25 mm Puradisc Filters are produced from pigment-free polycarbonate with.
PTFE Unlaminated Membrane Filters, 0.2 micron, 25mm, 50/pk SKU PTU022550 Manufacturer Sterlitech Pore Size 0.20 Diameter (mm) 25 Pack Size 50 Request A Quote Send us a message below to get a quote and we would be happy to help. Quality Customer Service Is Our Number One Priority.
Pore Size: Pore size provides an indication of largest pore diameter and can be related to the membrane’s ability to filter out particles of a certain size. 0.1 µm: mycoplasma removal o 0.20 to 0.22 µm: filter sterilization and ultracleaning of aqueous solutions and organic solvents (e.g., HPLC)
Syringe Filter 0.2 at Thomas Scientific A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50 Female Luer-Lok™ inlet and male Luer slip outlet Ethylene oxide sterilized Comes in a pack of 50
Feb 15, 2022 · PTFE syringe filters are made of Polytetrafluoroethylene (PTFE) membrane and a polypropylene overmold housing. Available in 13 mm and 25 mm diameters and 0.22 μm and 0.45 μm pore sizes. PTFE is the membrane of choice for use with
Filter Media: PTFE on a polypropylene support Housing: Polypropylene Filter Diameter 50 mm Effective Filtration Area 19.6 cm2 Typical Air Flow Rates 0.2 μm: 8 Lpm at 0.2 bar (20 kPa, 3 psi) 0.45 μm: 12 Lpm at 0.2 bar (20 kPa, 3 psi) 1 μm: 15 Lpm at 0.2 bar (20 kPa, 3 psi) Maximum Operating Temperature 130 °C (266 °F) at 1.0 bar (100 kPa, 15 psi)
With POREX. 2 | POREX® Virtek™ Medical PTFE Materials & Filters. DIFFERENTIATED PTFE FEATURES. • Raw materials in compliance with USP. class VI and free of animal-derived. additives. • High tensile strength. • Rolls widths from 8mm to 330mm. • Die cut discs from 3mm.