50 mm Filters with Superior Performancefor Demanding Applications. Reusable and autoclavable. PTFE membrane and polypropylene housing have broad chemical resistance. Large surface area provides greater throughput and high air flow rate. Available with a variety of inlet and outlet connectors.
Vent filters can provide a sterile barrier for air or gases entering or exiting vessels such as bioreactors, fermentation tanks, or carboys. These filters maintain the sterility of the interior environment and protect the atmosphere from contaminants within the vessel. Pall vent devices contain hydrophobic membranes that prevent the entry of
50 mm, pore size 0.2 μm, PTFE membrane, sterile, pkg of 10 ea Synonym (s): Z698822 NACRES: NB.24 Pricing and availability is not currently available. Properties material PTFE membrane polypropylene housing sterility sterile packaging pkg of 10 ea manufacturer/tradename Whatman 10463607 Whatman Article No. 28415864 (US reference) diam. 50 mm volume
The Pall Acro 50 is a disposable0.2 micron sterile vent filter and contains a Pall hydrophobic PTFE membrane, and is ideal for the sterile venting of small containers and as an in-line gas filter. The large effective filter area provides high flow rates, and filters can be autoclaved several times, ensuring low costs. Features
PTFE: Pore Size: 0.22 μm: Sterility: Non-sterile: Housing Material: Polypropylene: No. per Case: 10: No. per Pack: 10: Type: Syringe Filter: Diameter (Metric) 50 mm: Diameter (Metric) Membrane: 50 mm: Unit Size: Case of 10
Polypropylene housings provide a low cost alternative to PTFE and PVDF housings. Since the housings are constructed entirely out of polypropylene they are suitable for a wide range of applications for both liquids and gases. Each housing is available with two drain options; Manual Twist Drain or No Drain.
Gravimetric Analysis Membrane Filter, 0.22 µm, mixed cellulose esters with thin pad, 37 mm, white. A 0.22 µm pore size non-sterile filter validated for air monitoring. With biologically inert mixtures of cellulose acetate & cellulose nitrate, MF-Millipore membranes are widely used in analytical & research applications.
PTFE Membrane. GVS Laminated PTFE filters are made of a polytetrafluoroethylene polymer (PTFE) laminated to a polypropylene support for improved durability and easy handling. These filters are chemically compatible with strong acids and most aggressive solvents such as alcohols. PTFE (fine powder resin) is expanded into a 3-dimensional web-like
Reusable, in-line filters with 50 mm hydrophobic PTFE membranes in polypropylene housing. Large surface area provides greater throughput. Ideal for venting bioreactors, fermentation tanks, and carboys. Also for filtration of aggressive solvents and sterile gas purging of culture vessels.
May 21, 2019 · 50MM PTFE INLET SYRINGE FILTER: 50mm 0.22um or 0.45um PTFE Inlet Syringe Filters, Hydrophobic PTFE membrane is laminated with polypropylene. 50MM PTFE MAIN APPLICATION: Naturally hydrophobic PTFE membrane provides the best chemical resistance, and can be used forventing applications or filtering gases , individually wrapped filters.
of the Acro 50 vent filter and orient the outlet in an upward direction. 3. Gradually (with low pressure) wet the Acro 50 vent filter’s membrane, allowing the IPA to displace the air within the housing. 4. Flush the wetted filter with an additional 10-30 mL of IPA at higher syringe pressures to assure thorough
either polypropylene or acrylic copolymer housings. The larger 50 mm diameter disc filter has a PTFE membrane and polypropylene housing with hose barb connectors. This product is ideal for filtering aggressive solvents or gases and applications requiring sterile venting of gases. Because they have a hydrophobic (will not pass aqueous solutions)
Jan 14, 2013 · Filter Media: PTFE on a polypropylene support Type: Vent Device Pore Size: 0.2 µm Size: 50mm Effective Filtration Area: 19.6 cm2 Typical Air Flow: 8 Sterilization: Provided non-sterile. All are individually packaged. Maximum Operating Pressure: 4.1 bar (410 kPa, 60 psi) Use: Gas Filtration
PTFE membrane is a thin, highly porous film that behaves as an absolute retentive membrane. Their inherently hydrophobic nature make PTFE membranes ideal for applications such as filtering gases, aqueous aerosols, protecting vacuum pumps, or sterile venting fermentation tanks. PTFE is inert.