Food and Beverage Food safety is more important than ever and lower detection limits are making analysis even more challenging. Accurate and reliable testing is critical and Phenex filters are routinely used in preparation for analysis of pesticides, herbicides, fungicides, flavors, and fragrances.
pass ISO7704 testing. These filters are ideal for microbiological QC testing of water, food and beverage, raw materials and finished product. The 0.2 µm are plain white while the 0.45 µm are gridded for easier colony or particle counting. Filter funnels are available with gray membranes
Phenomenex PTFE membrane filter for gasses-HPLC Autosampler HPLC Column: 4.6 mm i.d. x 15 cm, Phenomenex Luna Phenyl-Hexyl analytical 25 mm Syringe Filters with 0.45 um PTFE Membr HOME
PTFE membrane filter for food and beverage Expression Hydrophobic PTFE Membrane Filters / Type 11806 | The main application of these membrane filters ist the filtration of air, gases and chemicals.
Add 25 mL of 50:50 ethanol/water to the tube. Shake the tube on a shaker for 1 hour at room temperature. Bring up to 50 mL with 50:50 ethanol/water and invert to mix. Centrifuge for 15 minutes at max rpm. Filter supernatant with a 0.45 µm PTFE syringe filter followed by a 0.2 µm PTFE syringe filter. (0.2 µm filtration step was to ensure no
Phenex syringe filters are available in a broad range of pore sizes and membrane types. All are non-sterile. Filters made with 17 or 30 mm membranes are suitable for use with samples of 1 mL or greater. Filters with 4 mm filter elements allow excellent recovery of samples less than 1 mL. Four and 17 mm filters are supplied
The filter element features Pall’s proprietary 0.2 micron polytetrafluoroethylene (PTFE) membrane, pleated to give high area in single open-end cartridges. Emflon PFAW cartridges offer exceptionally high flow rates to ensure low installation, operating, and compressor energy costs.
Step 4: Choose the filter design for your application. Corning offers three basic filter types: positive pressure-driven syringe and disc filters, Spin-X® centrifuge tube filters driven by centrifugation, and vacuum-driven filters. The vacuum-driven filters offer several different designs and styles in disposable plastic products.
As a membrane filter manufacturer, Hawach provides a series of pore sizes (0.1μm, 0.22μm, 0.45μm, 1.0μm, 3.0μm, 5.0μm, 10μm), high porosity, large dirt holding capacity, recoil and high-temperature disinfection; good pressure resistance. Thin, and highly porous, our PTFE disc membrane has OEM service and their sizes could be customized.
People are exposed daily to plastic containers used as food, beverage or Polytetrafluoroethylene (PTFE) membrane filters (0.1 µm), used for mobile phase
FOR SECURITY PURPOSES - because Internet Explorer is no longer supported by Microsoft, we suggest that you interact with our secure site through one of our supported browsers - Google Chrome, Firefox, or MS Edge.
PTFE Syringe Filters, Hydrophilic, 0.22 Micron, 13mm, 50/Pk (13HP020CN) PTFE Hydrophobic Syringe Filters Features: Highly hydrophobic Excellent chemical compatibility Very low extractables Superior flow performance compared to other hydrophobic membranes Applications: Clarification of nonaqueous lab reagents, solvents and samples
Final or sterile air filtration removes microorganisms from air or other gases, to protect contacted food and beverage products, ingredients, packaging and equipment surfaces from airborne microbial contamination. The selection criteria and sizing for these filters depends on filter type, required removal performance, gas type, and process
Biomed Scientific Syringe Filters PTFE 13mm Diameter 0.22um Pore Size Non Sterile Pack of 100 4.6 (272) $899 - $2799 FREE delivery Sterile Syringe Filters PTFE 25 mm Diameter 0.22 um Pore Size Individually Packaged 10/pk by Biomed Scientific 4.3 (54) $1199 - $8999 FREE delivery