Membrane filters serve as effective physical barriers that remove solids, viruses, bacteria, and other unwanted molecules. Specialized types are designed for softening, disinfecting, organic removal processing, and water desalination. The filters can be installed in compact, automated, or modular units.
Syringe Filters Acrodisc® Syringe Filters, 25 mm, Pall Laboratory Share Acrodisc® Syringe Filters, 25 mm, Pall Laboratory Supplier: Pall Laboratory These 25 mm syringe filters offer an available prefiltration layer and wide choice of filter media. Wide range of filter media available Available in 0.2 µm for UHPLC applications
Oct 11, 2021 · Acrodisc® Syringe Filters, 25 mm, Pall Laboratory | VWR. These 25 mm syringe filters offer an available prefiltration layer and wide choice of filter media.Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered.
0.22 μm pore size 75 % porosity Expand NY2004700 Nylon Net Filter, 20.0 um pore size, hydrophilic nylon membrane, 47 mm diameter 14 % porosity 20.0 μm pore size Expand GTTP04700 Isopore ™ Membrane Filter, 0.2 µm pore size, hydrophilic polycarbonate membrane, 47 mm diameter 0.22 μm pore size 13.8 % porosity Expand JCWP04700
Pall Acrodisc PTFE membrane filter for laboratory vacuum filter system Pall Acrodisc ptfe membrane filter 0.22um for laboratory Pall Shop - Supor® PES Membrane Disc Filters - Spoilage Supor Membrane is Low in Biomolecule Binding. 125I-labeled BSA (1.6 µg) or 32P-labeled DNA (500 ng) was diluted to 5 mL in
Quick and efficient sample filtration HPLC sample preparation Sterile isolation Autoclavable at 121°C Puradisc 25 is a 25 mm diameter syringe filter for sample volume throughput up to 100 mL . Low hold volumes of <100 µL allow for maximum sample recovery. Applications include HPLC aqueous Related Products: Autoclavable Syringe Filter
Whether pursuing analytical goals in life science, pharmaceutical methods, research and development, quality control, or environmental applications, Pall’s sample prep Acrodisc® syringe filters offer reliable and reproducible results. Our HPLC, LCMS and IC certified Acrodisc syringe filters efficiently remove particulate contamination from samples, protecting instruments and preventing costly system maintenance and premature column replacement.
Pall Laboratory products are designed for laboratory applications only. This product is not approved for use in medical, clinical, surgical or other patient applications. If you require further assistance in product selection for your chosen application, please contact Labcustomersupport@pall.com or call 1-800-521-1520.
MilliporeSigma™ Millex™-LG Sterile Syringe Filter Unit, Hydrophilic PTFE, 0.20 μm (Research Use Only) Ready-to-use, syringe-driven units designed for sterilizing and clarifying sterile solutions are available in 0.1, 0.22, 0.45 and 5.0 μm pore sizes. Promotions are available 28 MilliporeSigma™ Millex™ Samplicity™ Filters, 0.45 μm
.jpg)
4556 GHP Acrodisc Minispike, 0.45 µm, 13 mm 100/300 4564 GHP Acrodisc, 0.2 µm, 25 mm 50/200 4560 GHP Acrodisc, 0.45 µm, 25 mm 50/200 4559 GHP Acrodisc GF, GF/0.45 µm, 25 mm 50/200 4472 Acrodisc CR PTFE, 0.45 µm, 4 mm 250/750 4552 Acrodisc CR PTFE Minispike, 0.2 µm, 13 mm 100/300 4423 Acrodisc CR PTFE, 0.2 µm, 13 mm 100/300
MilliporeSigma™ Steritop™ Sterile Vacuum Bottle-Top Filters Filter and sterilize faster with a large 7.3cm diameter filter. Steritop™ Sterile Vacuum Bottle-Top Filters are sterile, threaded bottle-top filters with 0.22 micron pore size for vacuum filtration and sterilization of tissue culture media, protein and DNA solutions, and virus suspensions.
Syringe filters are attached to the end of a syringe to remove particles from a sample prior to analysis. Filtering liquids, the single-use devices force liquids through the filter either when fluids are initially drawn or delivered. Circular shaped in diameters that fit common syringe sizes, the cartridges remove fragments that would otherwise
Syringe filters are single-use, membrane-based devices used for the removal of particulate impurities from liquid and gas samples prior to analysis by methods such as HPLC, ion chromatography, gas chromatography, ICP, and dissolution testing. Proper filtration of samples improves the quality and consistency of analytical results and decreases
Millex-LCR, 13 mm, 0,45 µm, hydrophilic PTFE, 100/pk: 2402: Acrodisc Syringe Filter, 0.45 µm, wwPTFE membrane Minispike outlet, 13 mm (300/pkg) Syringe Filters: Millipore: SLCR025NB: Millex-LCR, 25 mm, 0,45 µm hydrophilic PTFE, 250/pk: 4914: Acrodisc Syringe Filter, 0.45 µm, wwPTFE membrane, 25 mm (200/cs) Syringe Filters: Millipore: SLCR025NB
Sterile filtration is used for many applications: Media with or without serum to support the growth of cell culture. Other reagents or solutions with sensitive components that may degrade when exposed to autoclave temperatures. Filtering supplements for addition to sterile growth media. Filtering samples to prevent microbial growth during storage.