Our Sterile Membrane Filtration Solution. We offer a range of sterile filtration products to meet different volume sizes for applications. Our products range from membranes, syringe filters, vacuum devices to larger capsules. Our AcroPak capsule products range in size from 20 cm2 to 1500 cm2 effective filtration area (EFA).
EMD Millipore Millex™-GP Sterile Syringe Filters with PES Membrane are ready-to-use, syringe-driven units with a unique membrane that results in six times less protein binding. Available in a medical grade unit, with a PES or acrylic tip. Available in 4, 13, 25, 33, and 50 mm diameters with a variety of membranes, Millex™ sterile syringe
Millipore Express ® SHF Cartridge Filter 10 in. 0.2 µm Code 7 Silicone. Product Information. Device Configuration. Cartridge. Maximum Inlet Pressure, bar (psi) Forward - 7 bar (100 psi) @ 25 °C; 1.7 bar (25 psi) @ 80 °C; 0.35 bar (5 psi) @ 135 °C; Reverse - 2.07 bar (30 psi) @ 25 °C; 0.07 bar (1 psi) @ 135 °C. Cartridge Code.
Sterile 0.22 μm membrane filter for particulate-free and bacteria-free water at the point of dispense, For use with Alpha-Q, Milli-DI® and Milli-Q® Academic / Biocel / Element / Synthesis / Plus / Gradient systems. Expand.
Aijiren Tech™ Nalgene™ syringe filters are built to meet your lab’s clarification and sterilization needs. Our filters are available in a variety of sizes and membranes that can be easily used for both sterile and non-sterile laboratory applications.
Finneran 13mm Mini-Tip Syringe Filters provide extremely low dead volume of less than 10ul, and are available in 0.2um and 0.45um pore sizes. Autoclavable. Compare this item Syringe Filters MicroLiter prefilters (1mm) are available to extend filter media life from three to seven times the normal usage.
*Refers to sterilization by filtration for small sample use which is an industry term for filters of pore size 0.2 um or smaller as referenced in guidance such as EPA Guidance for Industry Sterile Drug Products Produced by Aseptic Processing — Current Good Manufacturing Practice Section IX, Part B (September 2004).
Millipore. Millex-GP Syringe Filter Unit, 0.22 µm, polyethersulfone, 33 mm, gamma sterilized. A 33 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic Polyethersulfone (PES) membrane. Comes in a pack of 50. MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents.
What membrane filter pore size should I use for sterilization? Regardless of the membrane filter material, always use a 0.2 µm pore size membrane filter as the final filter for any sterilizing filtration. The 0.2 µm membranes used in Aijiren Tech™ Nalgene™ filters have been tested and shown to retain 100% of a challenge of 1 X 107
SLLG025SS. Millipore. Millex-LG, 0.20 µm. Download. Zoom. A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Comes in a pack of 50. Millex-LG, 0.20 µm MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. FAQs.
Feb 17, 2020 · PVDF Hydrophilic Syringe Filters 0.22um or 0.45um . Hydrophilic PVDF (Polyvinylidene Fluoride) is an optimal choice for protein-based samples with high non-specific binding, HPLC (High Performance Liquid Chromatography) and UHPLC (Ultra HPLC).
Whether your research necessitates prefiltration, sample preparation, sterile filtration, laboratory filtration, or gas venting, Nalgene syringe filters are lab essentials. Key Features. 10 to 100mL sample size. Inlet: Female Luer-Lok™. Outlet: Male Luer slip. Polypropylene housing with ID color rings. Pore size and membrane type printed on unit.
Minisart ® NML Syringe Filters provide the optimal method for clarification and sterilization of liquids, robustly removing bacteria and particles, without any impact on product quality or loss of target molecule. Superior filter areas up to 6.2 cm 2; 0.1µm to 5µm pore sizes; Low adsorption characteristics; Shop Minisart ® NML Syringe Filters
EZFlow 13mm, 25mm, and 33mm Syringe Filters are used for prefiltration, clarification, or fine particulate removal. These syringe filters are available in a variety of filter membrane materials, offered in 0.2µm or 0.45µm pore sizes. The filter membranes are reinforced with polypropylene.
Millex-GV Filter, 0.22 µm, A 4 mm diameter sterile syringe filter with a 0.22 µm pore size hydrophilic PVDF membrane. Comes in a pack of 100. 0.22 μm pore size Expand SLGSV255F Millex-GS Syringe Filter Unit, 0.22 µm, A 25 mm diameter sterile syringe filter with a 0.22 µm pore size Mixed Cellulose Esters membrane. Comes in a pack of 50.