The filter element features Pall's advanced 0.2 micron rated polytetrafluoroethylene (PTFE) double-layer membranes, pleated with very high area into single open-end cartridges. They are built to withstand demanding in situ steaming conditions in either the forward or reverse direction.
Hydrophilic PTFE syringe filters have broad chemical compatibility and high pH resistance and are optically clear when wet with water. They are versatile filters for use with aqueous and aggressive organic solvent-based solutions and are especially ideal for HPLC sample preparation.
Millex Syringe Filter Unit, Hydrophilic PTFE, Non-sterile Replaces SLLGH13NL, 0.20 µm pore size, 13 mm diameter, Millex-LG hydrophilic PTFE membrane - Find MSDS or SDS, a COA, data sheets and more information.
Choice PTFE Hydrophilic Syringe Filters 0.2 µm, 13 mm, 100 Pk. Disposable: Yes: Material: PTFE (Hydrophilic) Material (Membrane) PTFE (Hydrophilic) Pore Size: 0.2 μm: Sterility: Non-sterile: For Use With (Application) HPLC, SPE: Housing Material: Solvent Resistent, Low-Extractable Polypropylene: No. per Pack: 100: Prefilter: No: Pressure Rating: 90 psi: Product Line: Choice: Type
MF-Millipore ® Membrane Filter, 0.22 µm pore size, 25 mm diameter, mixed cellulose esters (MCE) membrane, hydrophilic, white, 100 discs Expand GTTP04700 Isopore ™ Membrane Filter, 0.2 µm pore size, hydrophilic polycarbonate membrane, 47 mm diameter Expand HNWP04700 Nylon Net Filter, 0.45 um pore size, hydrophilic nylon membrane, 47 mm diameter
Gravimetric Analysis Membrane Filter, 0.22 µm, mixed cellulose esters with thin pad, 37 mm, white. A 0.22 µm pore size non-sterile filter validated for air monitoring. With biologically inert mixtures of cellulose acetate & cellulose nitrate, MF-Millipore membranes are widely used in analytical & research applications.
Aervent-50 0.2 µm hydrophobic filters contain a 50 mm Aervent PTFE membrane in a bi-directionally supported polypropylene casing. This sterilizing-grade filter is designed for critical small scale gas line and air venting applications. The hydrophobic Aervent PTFE membrane provides high Related Products: Hydrophobic Filter Compare this item
As a membrane filter manufacturer, Hawach provides a series of pore sizes (0.1μm, 0.22μm, 0.45μm, 1.0μm, 3.0μm, 5.0μm, 10μm), high porosity, large dirt holding capacity, recoil and high-temperature disinfection; good pressure resistance. Thin, and highly porous, our PTFE disc membrane has OEM service and their sizes could be customized.
A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophilic PTFE membrane. Comes in a pack of 50. Millex-LG, 0.20 µm MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. FAQs User Guides View Products on Sigmaaldrich.com SLLG025SS
A 25 mm diameter sterile syringe filter with a 0.2 µm pore size hydrophobic PTFE membrane, ethylene oxide sterilized. Millex-FG, 0.20 µm, hydrophobic PTFE, 25 mm MSDS (material safety data sheet) or SDS, CoA and CoQ, dossiers, brochures and other available documents. CoQ View Products on Sigmaaldrich.com SLFG025LS 50 Price could not be retrieved
MilliporeSigma™ Steritop™ Sterile Vacuum Bottle-Top Filters Filter and sterilize faster with a large 7.3cm diameter filter. Steritop™ Sterile Vacuum Bottle-Top Filters are sterile, threaded bottle-top filters with 0.22 micron pore size for vacuum filtration and sterilization of tissue culture media, protein and DNA solutions, and virus suspensions.
Millex ® hydrophilic PTFE syringe filters boast low analyte retention, with ≥90% recovery of small molecules – matching or exceeding the performance of other equivalent filters. Figure 2. Comparison of small molecule retention of 0.45 μm hydrophilic PTFE syringe filters from different vendors. Figure 3.
Millex-GV Filter, 0.22 µm Match Criteria: Product Name All Photos ( 2) BRAND® macro pipette controller membrane filters 3 μm (PP,PTFE) Match Criteria: Product Name, Keyword All Photos ( 1) MultiScreen-GV Filter Plate, 0.22 µm, clear, sterile Match Criteria: Product Name All Photos ( 1) Millex-GS Syringe Filter Unit, 0.22 µm
PTFE Unlaminated Membrane Filters. Our unsupported, hydrophobic, PTFE membrane filters are ideal for sterilization and venting applications involving air, gasses, and solvents/acids incompatible with most other filters. These PTFE filters are chemically and biologically inert, stable up to 260°C, and will withstand the majority of concentrated acids and bases and are especially useful for environments that contain water vapor.
Overview of Non-Sterile Millex® Syringe Filters with Hydrophilic PTFE. • Lowest extractables, optimizing background levels of sensitive analyses like UHPLC and LC-MS. • Filtration of protein-containing solutions, and aqueous or organic solutions. • Available in 0.20 µm and 0.45 µm pore sizes and three diameters to suit your application